• google scholor
  • Views: 3721

  • PDF Downloads: 132

The use of low cost and environment friendly materials for the removal of heavy metals from aqueous solutions

Nour El- Din T. Abdel-Ghani1 * and Ghadir. A. El-Chaghaby2

DOI: http://dx.doi.org/10.12944/CWE.3.1.05

The objective of this study was to evaluate the use of rice husk and Nile rose plant for their ability to remove Cr (III), Cu(II), Zn(II), Cd(II) and Pb(II) from their mixed aqueous solution. The effects of contact time, pH, initial metal concentration and amount of adsorbent on the adsorption process at room temperature 25 ± 2°C were studied. Batch adsorption studies showed that an equilibrium time of 90 min. was required for the adsorption of Cr (III), Cu(II), Zn(II), Cd (II) and Pb(II) on both investigated adsorbents. The maximum metal removal was found to be pH dependent . With an increase in the concentrations of these metals, their adsorption decreased on both of the adsorbents. The experimental data were best fitted to the Temkin isotherm model. Rice husk and Nile rose plant were found to be good metal adsorbents. A case study was also performed to examine the feasibility of using the investigated adsorbents for treating real electroplating wastewater.


Adsorption; Chromium; Copper; Zinc; Cadmium; Lead; Rice Husk; Nile Rose Plant; Temkin Isotherm

Copy the following to cite this article:

Abdel-Ghani N.E.T, El-Chaghaby G.A. The use of low cost and environment friendly materials for the removal of heavy metals from aqueous solutions. Curr World Environ 2008;3(1):31-38 DOI:http://dx.doi.org/10.12944/CWE.3.1.05

Copy the following to cite this URL:

Abdel-Ghani N.E.T, El-Chaghaby G.A. The use of low cost and environment friendly materials for the removal of heavy metals from aqueous solutions. Curr World Environ 2008;3(1):31-38. Available from: http://www.cwejournal.org/?p=736