The Geometric and Hydraulic Simulation of Detention Dams by Integrating HEC-HMS and GIS (Case Study: Neka River Drainage Basin)
Arman Shabani Bazneshin1 * , Alireza Emadi1 and Ramin Fazl Ola1
1
Department of Water Engineering,
Sari Agricultural Science & Natural Resources,
Sari,
Iran
Corresponding author Email: a_shabani67@yahoo.com
DOI: http://dx.doi.org/10.12944/CWE.10.Special-Issue1.102
Floodwater is a natural and integral part of people's life in all urban and rural societies. Therefore, providing strategies for controlling this natural phenomenon and reducing its damages is necessary. Construction of detention dams is one of the structural methods for controlling floodwaters which is studied in this article. In the present research, Neka river drainage basin was selected and HEC-HMS software was used for simulating the reservoir. In HEC-HMS software, it is necessary to define a method for routing the reservoir, determining the height and type of the outlet structure, determining reservoirs' level-height equations, etc. After completing the required information and implementing the model, floodwater hydrographs were compared in both before and after situations. Results showed that HEC-HMS software can be used as a powerful tool in the geometric and hydraulic simulation of detention and storage dams in designing hydraulic projects.
Copy the following to cite this article:
Bazneshin A. S, Emadi A, Ola R. F. The Geometric and Hydraulic Simulation of Detention Dams by Integrating HEC-HMS and GIS (Case Study: Neka River Drainage Basin). Special Issue of Curr World Environ 2015;10(Special Issue May 2015). DOI:http://dx.doi.org/10.12944/CWE.10.Special-Issue1.102
Copy the following to cite this URL:
Bazneshin A. S, Emadi A, Ola R. F. The Geometric and Hydraulic Simulation of Detention Dams by Integrating HEC-HMS and GIS (Case Study: Neka River Drainage Basin). Special Issue of Curr World Environ 2015;10(Special Issue May 2015).
Available from: http://cwejournal.org?p=711/