Heavy and toxic metals analysis from effluent of paper mill, based on cotton comber and cotton linter raw materials
Vibha Agrawal1 * and S.A. Iqbal2
1
Department of Chemistry,
Gyan Ganga Institute of Technology and Management,
Bhopal,
India
2
Department of Chemistry,
Safia College of Science and Education,
Bhopal,
462 001
India
http://dx.doi.org/10.12944/CWE.3.1.29
The present study deals with effluent analysis of a paper mill using cotton comber and cotton linter as raw material for paper manufacturing process. The effluents generated at different stages were collected. The fibrous sludge samples recovered in different section of mill were also collected. The inorganic parameters i.e. alkalinity, hardness, sulphate, chloride, phosptahe, sodium, potassium, iron, copper, nickel, mercury etc., were estimated. The heavy metal content of the untreated and treated effluents and the sludge samples are determined by the atomic absorption spectrophotometer. The inorganic parameters as well as heavy metal analysis results were interpreted and compared with the permissible limits.
Copy the following to cite this article:
Agrawal V, Iqbal S.A. Heavy and toxic metals analysis from effluent of paper mill, based on cotton comber and cotton linter raw materials. Curr World Environ 2008;3(1):185-188 DOI:http://dx.doi.org/10.12944/CWE.3.1.29
Copy the following to cite this URL:
Agrawal V, Iqbal S.A. Heavy and toxic metals analysis from effluent of paper mill, based on cotton comber and cotton linter raw materials. Curr World Environ 2008;3(1):185-188. Available from: http://www.cwejournal.org/?p=803
